Looking For Service Engineers
-
- Coin Op Group Apprentice
- Posts: 31
- Joined: February 28th, 2012, 5:52 pm
- Area Covered: Full UK Coverage
- Machines Used: Washroom, Sweets, tubz vending, SWP, Discapa, Toys, Crane
- Referred by?: Google
- Location: Tamworth
- Contact:
Looking For Service Engineers
Good Morning - We have just put a couple of jobs on Jobcentre Plus and I thought I'd ask on the forum. We are looking to recruit two service engineers. One in the Cheshunt area for front of house and washroom machines. The other covering Berkshire, Hampshire & Dorset looking after just front of house. Details as below for each post.
VENDING MACHINE SERVICE ENGINEER
Job No:WAX/40194
SOC Code:5223
Wage: £17,000 per annum
Hours: 40 HOURS MONDAY TO SUNDAY, DAYS
Location: Cheshunt, Waltham Cross, Herts EN8
Duration: Permanent
Date posted: 19 July 2012
Description: Immediate, permanent vacancy covering an area from Watford (west), down to central London (South), Luton (North) and Chelmsford (East). The candidate will be ideally based in the Cheshunt/ Harlow area, although applications considered from anyone inside the geographic area. Duties include, servicing, collecting from, installing & repairing Toy and wash room vending machines. Typically these machines are in the Pub / Supermarket sector. The successful applicant will be responsible for balancing cash on a daily basis and banking it also. Machines are mainly mechanical, but some are electronic so some experience in this type of field is an advantage. Full driving licence essential as well as some computer skills as all input is via a hand-held PDA device.
VENDING MACHINE SERVICE ENGINEER
Job No: FAR/51374
SOC Code: 5223
Wage: £17,000 per annum
Hours: 40 HOURS MONDAY TO SUNDAY, DAYS
Location: Farnborough, Hampshire GU14
Duration: Permanent
Date posted: 24 July 2012
Description: Immediate, permanent vacancy covering an area from Salisbury (West) Reading (North) Gatwick (East) Southampton, Portsmouth, Bournemouth (South). The candidate will be ideally based in the Farnborough / Aldershot area, although applications considered from anyone inside the geographic area. Duties include, servicing, collecting from, installing & repairing. Toy vending machines. Typically these machines are in the Pub / Supermarket sector. The successful applicant will be responsible for balancing cash on a daily basis and banking it also. Machines are mainly mechanical, but some are electronic so some experience in this type of field is an advantage.Full driving licence essential as well as some computer skills as all input is via a handheld PDA device.
You can apply for either job by sending a CV/written application to Gary Cantelo at Perform Marketing Ltd, gary@performmarketing.co.uk.
VENDING MACHINE SERVICE ENGINEER
Job No:WAX/40194
SOC Code:5223
Wage: £17,000 per annum
Hours: 40 HOURS MONDAY TO SUNDAY, DAYS
Location: Cheshunt, Waltham Cross, Herts EN8
Duration: Permanent
Date posted: 19 July 2012
Description: Immediate, permanent vacancy covering an area from Watford (west), down to central London (South), Luton (North) and Chelmsford (East). The candidate will be ideally based in the Cheshunt/ Harlow area, although applications considered from anyone inside the geographic area. Duties include, servicing, collecting from, installing & repairing Toy and wash room vending machines. Typically these machines are in the Pub / Supermarket sector. The successful applicant will be responsible for balancing cash on a daily basis and banking it also. Machines are mainly mechanical, but some are electronic so some experience in this type of field is an advantage. Full driving licence essential as well as some computer skills as all input is via a hand-held PDA device.
VENDING MACHINE SERVICE ENGINEER
Job No: FAR/51374
SOC Code: 5223
Wage: £17,000 per annum
Hours: 40 HOURS MONDAY TO SUNDAY, DAYS
Location: Farnborough, Hampshire GU14
Duration: Permanent
Date posted: 24 July 2012
Description: Immediate, permanent vacancy covering an area from Salisbury (West) Reading (North) Gatwick (East) Southampton, Portsmouth, Bournemouth (South). The candidate will be ideally based in the Farnborough / Aldershot area, although applications considered from anyone inside the geographic area. Duties include, servicing, collecting from, installing & repairing. Toy vending machines. Typically these machines are in the Pub / Supermarket sector. The successful applicant will be responsible for balancing cash on a daily basis and banking it also. Machines are mainly mechanical, but some are electronic so some experience in this type of field is an advantage.Full driving licence essential as well as some computer skills as all input is via a handheld PDA device.
You can apply for either job by sending a CV/written application to Gary Cantelo at Perform Marketing Ltd, gary@performmarketing.co.uk.
-
- Coin Op Group Grand Master
- Posts: 852
- Joined: July 6th, 2009, 7:43 pm
- Area Covered: east and west midlands
- Machines Used: kiddie rides, sweet and toy vend
- Referred by?: M.Slater
- Location: tamworth & b`ham + surrounding areas
Re: Looking For Service Engineers
£17000, for a 40 hour week good luck with that
Ade
Ade
-
- Coin Op Group Apprentice
- Posts: 31
- Joined: February 28th, 2012, 5:52 pm
- Area Covered: Full UK Coverage
- Machines Used: Washroom, Sweets, tubz vending, SWP, Discapa, Toys, Crane
- Referred by?: Google
- Location: Tamworth
- Contact:
Re: Looking For Service Engineers
We're very lucky thanks Ade!
- Coin Operated Group
- Site Admin
- Posts: 3422
- Joined: January 13th, 2009, 10:41 am
- Area Covered: Birmingham, West Midlands
- Machines Used: Arcade Machines, Quiz & Big Vendors
- Referred by?: myself
- Location: Birmingham
- Contact:
Re: Looking For Service Engineers
Thanks for the post it is appreciated.
£8+ an hour seems reasonable to me.
£8+ an hour seems reasonable to me.
-
- Coin Op Group Grand Master
- Posts: 821
- Joined: July 30th, 2009, 9:28 pm
- Area Covered: North Licolnshire, Doncaster
- Machines Used: Tower
- Referred by?: Matt Slater. E-bay member Slater210
- Location: Scunthorpe
Re: Looking For Service Engineers
In this climate, it a good job for someone &17k is a reasonable wage.
Paul
Paul
-
- Coin Op Group Regular
- Posts: 140
- Joined: January 30th, 2009, 6:21 pm
- Area Covered: none
- Machines Used: all
- Location: East Coast Lincolnshire
- Contact:
Re: Looking For Service Engineers
theres a lot of service engineers on less than 17K, some of the majors pay 14 - 15K
-
- Coin Op Group Master
- Posts: 450
- Joined: January 20th, 2009, 9:38 pm
- Area Covered: devon dorset somerset
- Machines Used: bulk tower toy condoms
Re: Looking For Service Engineers
why not sub it out to people on here as an hourly basis. For example I know three machines of performs are currently out of order in North Devon as I share some sites/shop in Tescos. Wouldnt take much to clear the coin jams.
-
- Coin Op Group Grand Master
- Posts: 852
- Joined: July 6th, 2009, 7:43 pm
- Area Covered: east and west midlands
- Machines Used: kiddie rides, sweet and toy vend
- Referred by?: M.Slater
- Location: tamworth & b`ham + surrounding areas
Re: Looking For Service Engineers
good idea, pay an operator on here by the hour, name site and nearest engineer could go
Ade
Ade
-
- Coin Op Group Grand Master
- Posts: 821
- Joined: July 30th, 2009, 9:28 pm
- Area Covered: North Licolnshire, Doncaster
- Machines Used: Tower
- Referred by?: Matt Slater. E-bay member Slater210
- Location: Scunthorpe
Re: Looking For Service Engineers
I doubt that most on here operate the big machines that large companies have, but that is not a big issue. However, if a site 100 miles away from base hits a problem a couple of days after it was refilled, it would be costly to send someone out. Why not consider subbing one person per region and if necessary, which may save money, or go the whole hog and sub out the whole operation.
Paul
Paul
-
- Coin Op Group Grand Master
- Posts: 800
- Joined: February 7th, 2009, 5:39 pm
- Area Covered: Dorset/Somerset/Wiltshire
- Machines Used: Bulk/Towers/Pringles
- Referred by?: Yes brother - Glenn Borthwick
- Location: Dorset, Somerset, Devon
Re: Looking For Service Engineers
May work for me