PARTS NEEDED for converted cigarette Pringles machine

[Vendition Ltd]

Hi everyone,

I urgently need some parts for the converted Sinclair Collis electronic pringles machines.

Attached you will see a photo of a plastic rubber band which goes around the cogs at the front of the machine which turn the metal drums to vend the pringles - I need 4 of these

I also need a replacement coin mechanism as one of my machines just keeps rejecting any money you put inside it for some reason?

Would really appreciate any help you have as if I do not sort it soon I am likely to loose the sites

Kind regards

Ross

[Mark@YorVend]

The drive belt should be easy enough to find. I assume you have tried contacting the original manufacturer of the machines?
Rapidonline.com or brammer.co.uk both sell toothed drive belts. You will need to measure all the way round and count the number of teeth on it, you should be able to get an identical match.
I would imagine the coin mech would have to come from the manufacturer, unless you know an electrical/mechanical engineer that could repair it.

Have you considered just replacing the machine?

[Coin Operated Group]

Coin solutions can repair the mech and upgrade it to take new coins at the same time

[Vendition Ltd]

Thanks for your help will try those leads

Kind regards

Ross

[Coin Operated Group]

http://drivebeltshop.co.uk/

worth a try.