Karls phone number
-
- Coin Op Group Valued Contributor
- Posts: 94
- Joined: June 7th, 2010, 7:59 am
- Area Covered: Central Scotland
- Machines Used: Combo, Can, Bottles, Snacks
- Referred by?: Google
- Contact:
Karls phone number
Hi does anyone have a guy called Karls phone number, I've lost it and am looking for spare parts....spacers for a vendo 189 if anyone can help. Thx
- Coin Operated Group
- Site Admin
- Posts: 3423
- Joined: January 13th, 2009, 10:41 am
- Area Covered: Birmingham, West Midlands
- Machines Used: Arcade Machines, Quiz & Big Vendors
- Referred by?: myself
- Location: Birmingham
- Contact:
Re: Karls phone number
0113-240 1788 vendo uk should be able to help. What do you need spacers for?
-
- Coin Op Group Valued Contributor
- Posts: 94
- Joined: June 7th, 2010, 7:59 am
- Area Covered: Central Scotland
- Machines Used: Combo, Can, Bottles, Snacks
- Referred by?: Google
- Contact:
Re: Karls phone number
Thanks Matt, I need the spacers so that I can make the can rows hold double the amount of cans and place them 2 deep.
- Coin Operated Group
- Site Admin
- Posts: 3423
- Joined: January 13th, 2009, 10:41 am
- Area Covered: Birmingham, West Midlands
- Machines Used: Arcade Machines, Quiz & Big Vendors
- Referred by?: myself
- Location: Birmingham
- Contact:
Re: Karls phone number
You just move the back plate forwards dont you?
-
- Coin Op Group Valued Contributor
- Posts: 94
- Joined: June 7th, 2010, 7:59 am
- Area Covered: Central Scotland
- Machines Used: Combo, Can, Bottles, Snacks
- Referred by?: Google
- Contact:
Re: Karls phone number
Hi Matt,
The spacers ( at least thats what I was told they were called) are needed so that they catch a can and allow the other one to drop.
I have another identical machine so was able to do it on that one but this machine has the spacers missing.
Labelled C on the bottom right of diagram attached.
Thanks for all your help.
The spacers ( at least thats what I was told they were called) are needed so that they catch a can and allow the other one to drop.
I have another identical machine so was able to do it on that one but this machine has the spacers missing.
Labelled C on the bottom right of diagram attached.
Thanks for all your help.
You do not have the required permissions to view the files attached to this post.