20p bulk
- Coin Operated Group
- Site Admin
- Posts: 3423
- Joined: January 13th, 2009, 10:41 am
- Area Covered: Birmingham, West Midlands
- Machines Used: Arcade Machines, Quiz & Big Vendors
- Referred by?: myself
- Location: Birmingham
- Contact:
20p bulk
Got a 20 bulk, bought some 20p sticky mix and they seem to jam every 3 or 4, the egg shaped capsule gets stuck just after its popped thrtough the springs, they seem slightly bigger than previous capsules. Is there a simple fix for this.?
-
- Coin Op Group Apprentice
- Posts: 48
- Joined: September 17th, 2010, 8:09 am
- Area Covered: Nationwide
- Machines Used: 3L Capsule Vendors, Bulk vendors, Cranes, Rides
- Referred by?: Matt Slater
Re: 20p bulk
Hi Matt, need more info:
Which bulk machine, vending wheel (sweet or capsule), and which sticky (as some chinese capsules are slightly bigger)?
Bulk tend to have plenty space in the vending chute once the capsule is passed the spring brushousing. I think u're problem is in the vending wheel.
Which bulk machine, vending wheel (sweet or capsule), and which sticky (as some chinese capsules are slightly bigger)?
Bulk tend to have plenty space in the vending chute once the capsule is passed the spring brushousing. I think u're problem is in the vending wheel.
- Coin Operated Group
- Site Admin
- Posts: 3423
- Joined: January 13th, 2009, 10:41 am
- Area Covered: Birmingham, West Midlands
- Machines Used: Arcade Machines, Quiz & Big Vendors
- Referred by?: myself
- Location: Birmingham
- Contact:
-
- Coin Op Group Apprentice
- Posts: 48
- Joined: September 17th, 2010, 8:09 am
- Area Covered: Nationwide
- Machines Used: 3L Capsule Vendors, Bulk vendors, Cranes, Rides
- Referred by?: Matt Slater
Re: 20p bulk
That I've never had! It can only be that u're using a 27mm wheel for a 26mmx32mm caps, beaver has different size vending wheels right up to 35mm diameter. Is it an old fuzzy brush wheel? As that was strictly 27mm.
- choice vending
- Coin Op Group Veteren
- Posts: 240
- Joined: January 20th, 2009, 5:39 pm
- Area Covered: walsall, north bham, A5 area
- Machines Used: towers, bulk vendors, kiddies rides, football tabl
- Location: Walsall, Bham, tamworth, cannock,and surrounding areas in the West Midlands
Re: 20p bulk
You need to ajust the hole size in the wheel capule housing. also best if the holes are lined up straight when you put the machine back together after filling. There is a lid missing on one of your machines in west brom call me if you need a spareNational Vending wrote:It's a beaver and they get stuck in the wheel
- Coin Operated Group
- Site Admin
- Posts: 3423
- Joined: January 13th, 2009, 10:41 am
- Area Covered: Birmingham, West Midlands
- Machines Used: Arcade Machines, Quiz & Big Vendors
- Referred by?: myself
- Location: Birmingham
- Contact: