New 5p and 10p coins
-
DT Vending
- Coin Op Group Regular
- Posts: 156
- Joined: November 11th, 2012, 5:35 pm
- Area Covered: South and West Wales
- Machines Used: Clenport
- Referred by?: Google Search
New 5p and 10p coins
Have any operators seen these yet? How can I adjust my coin mechanisms to accept these new coins on my electronic pringle machines ? Any advice / suggestions much appreciated.
-
Snackmore
- Site Admin
- Posts: 1466
- Joined: April 26th, 2011, 7:36 pm
- Area Covered: Leicestershire
- Referred by?: Google search
- Location: Leicestershire and North Northamptonshire
Re: New 5p and 10p coins
You will need to get your coin mech/acceptor reprogrammed to accept the new coins.
Coin Solutions are the people to deal with although unless you have a spare mech your machine will be down whilst you send it away and wait for it to come back. Costs roughly £30 depending on the mech and if you want a service as well. Speak to Darren he is a top bloke and knows all there is to know about mechs
Coin Solutions are the people to deal with although unless you have a spare mech your machine will be down whilst you send it away and wait for it to come back. Costs roughly £30 depending on the mech and if you want a service as well. Speak to Darren he is a top bloke and knows all there is to know about mechs
-
DT Vending
- Coin Op Group Regular
- Posts: 156
- Joined: November 11th, 2012, 5:35 pm
- Area Covered: South and West Wales
- Machines Used: Clenport
- Referred by?: Google Search
Re: New 5p and 10p coins
Cheers Steve that's great. Thanks for your help.