Hi guys,
We seem to keep getting the same problem with some of our Snack a can towers where they start to free vend because the peg that stops the coin mech turning backwards falls out. I can fix it but it has happened again on a couple of machines.
So the question is apart from swapping the coin mech is there a permanent fix?
Thanks
Andy
Free vending towers
-
- Coin Op Group Regular
- Posts: 140
- Joined: June 25th, 2009, 10:30 am
- Area Covered: STOKE/CREWE/WARRINGTON/CHESTER
- Machines Used: tower and pringles
- Referred by?: rob from salysol gb
- Location: Cheshire, Stoke, Chester, Wirral, Stockport
Re: Free vending towers
It's just down to general wear and tear of machine.
Hole that pin sits in starts to get a bit bigger.
Undo four screws and place a small washer(or 5p if none to hand) over the pin a rescrew back together.
This should stop pin popping out of hole.
Mike Holness
Topvend
Hole that pin sits in starts to get a bit bigger.
Undo four screws and place a small washer(or 5p if none to hand) over the pin a rescrew back together.
This should stop pin popping out of hole.
Mike Holness
Topvend
Style wrote:Hi guys,
We seem to keep getting the same problem with some of our Snack a can towers where they start to free vend because the peg that stops the coin mech turning backwards falls out. I can fix it but it has happened again on a couple of machines.
So the question is apart from swapping the coin mech is there a permanent fix?
Thanks
Andy
-
- Coin Op Group Elite
- Posts: 1161
- Joined: June 1st, 2012, 11:00 pm
- Area Covered: Milton Keynes
- Machines Used: Sweet towers, toys, beavers, pringles
- Referred by?: random
Re: Free vending towers
Thanks, will try that.
Andy
Andy
-
- Coin Op Group Veteren
- Posts: 273
- Joined: December 30th, 2011, 6:01 pm
- Referred by?: Reader
Re: Free vending towers
everyone loves freebies, just think of all the people you've made happy. the smiles on their faces are well worth the few pennies that it costs you :)