Adjusting Dixie Narco 276e Cam

[tom@snaxforu]

Hello I have came across a problem with one chamber the Cam needs to be adjusted from Bottle setting to Cans
Have not adjusted a Cam on these before any help would be appreciated.

Cheers Tom

[Coin Operated Group]

What colour is cam? how deep is dixie, ie 3 deep cans.

[tom@snaxforu]

Its a brown Cam and 3 cans deep

Cheers Tom

[Coin Operated Group]

so put 3 cans in 3 rows deep and set metal plate at back so theres about 10mm gap between sold out paddle and can.

If the carrier has a bar in you can remove it for cans, then set your cam to number 2 (I Think)

Test vend 6 times ensuring product drops.

Id it fails to drop check to see if there is another cam setting with 3 notches out.

[tom@snaxforu]

Cheers Matt thanks for the info just wondering how to adjust the cam as have not done this before

Thanks

[Coin Operated Group]

Its 2 plastic plates on top of each other. Just pull the edge of the front one and twist it round ,pull it where the edge of cam is adacent to the dimple is in the numbered hole and rotate

[tom@snaxforu]

Thanks Matt will give that a go when Im back on site
Cheers Tom

[tom@snaxforu]

Had a go at that this morning and saw how that Cam adjust works, seemed to be in the right hole i.e. same as the the Cams that are set for cans in the chambers that are working ok. Through the orientation of Cam is different. Problem is though I am getting a vend of 1 can 0 cans the 2 cans.
Any thoughts appreciated.
Tom

[Coin Operated Group]

did you take the bar out? and can you see three notches on cam now.

[tom@snaxforu]

Hello Matt yes took out the bar today and have 3 notches but still getting 2,0,1 vend - wIll be back on site soon and take a couple of pics
Thanks Tom